home *** CD-ROM | disk | FTP | other *** search
- Path: crux4.cit.cornell.edu!fkrj
- From: fkrj@crux4.cit.cornell.edu (Benjamin Kenobi)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Cybervision, Busters, CPU boards etc.
- Date: 11 Jan 1996 12:37:49 GMT
- Organization: Cornell University
- Sender: do12@cornell.edu (Verified)
- Message-ID: <4d30at$p1p@newsstand.cit.cornell.edu>
- References: <4ah38r$j9s@news.uit.no> <30F4EF79.41C6@physics.gla.ac.uk>
- NNTP-Posting-Host: crux4.cit.cornell.edu
- X-Newsreader: TIN [version 1.2 PL2]
-
- Stephen J. Gowdy (S.Gowdy@physics.gla.ac.uk) wrote:
- : I've only been using the board for a couple of days now but it seems okay. I
- : have a Revision V3.0 CPU board and Buster 11. I believe that it was only in
- : the ZIII modes where the CPU and buster mattered. I think I'm running in ZIII
- : mode, I haven't looked at the jumper but SysInfo says it is a ZIII card and
- : reports my other two cards as ZII.
-
- : regards,
-
- : Stephen.
-
-
- Hmm I have Buster09 and Rev3.0 and I get occasional gurus 8000 0004 while I
- am running under intuition but not much trouble at all under shapeshifter.
- I suspect that the problem is resulting from the fact that I have both of
- these problems and that if I fix one of them the problem will go away. Right
- now I really don't know what the problem is except that I have removed every
- software patch that I can find and the problem still exists to the point where
- I can't regularly use it.
-
- Dan
-
- my buster interacting with
-